Repairing a printer is not a complicated task. You can easily fix some of the issues on your or can call in some tech support center.
If you own a printer, you must have faced some technical issues that might have prevented you from getting the best out of it. Here are some of the common printer issues:
- Printer spooler service not running
- Paper jam issue
- Power cable issue
- Cartridge not working
- Paper rolling out of printer completely blank
- Printing result is not up to mark
- Driver failure
About 90 percent of printer problems are related with interface/configuration mistakes and special effects errors. Chances of any mechanical errors are very rare.
Interfacing and configuration issues arise when there is some problem in networking and you may get error like, printer is not found. There are two possible reasons, it may be not be getting identified by your operating system or there may be compatibility issue related with hardware. Please follow the following steps:
Step1. Cross-verify your USB cable, which is used for connecting printer to your computer. You must replace it if there is any damage caused to it.
Step 2. Make sure that your printer is being identified by your computer. From the main menu of Windows, choose the "Printers and Faxes" option and follow the steps to add your USB printer.
If even your printer is not recognized by your computer, then it reflects your printer software may is corrupted. Hence, you need to download it from manufacturer’s website or from a CD.
Finally, check by changing the setting of your printer to default status.
Here are some of the problems that you can fix on your own:
Paper jam: Usually it happens when more than one sheet of paper stuck in the printer. You can gently lift the cover of your printer and pull them out.
Ink level: Check the level of the ink in your cartridge and refill it asap.
Clogged cartridges: This is the most common fault, when your cartridge head is clogged with dry ink. You can repair it with simple command as: Control Panel> Printer>Right Click> Properties>Maintenance> Clean Cartridges.
Driver failure: You can check your device manager, if there is any conflict related with driver it will get reflected as exclamation mark. It shows there is some fault in printer driver and it needs to be replaced. You can make a clean install of your driver.
Alternatively, you can choose to update your printer driver as: "Control Panel > Printers > Right Click > Properties > Update Driver"
Now, you must have understood that most of the problems can be addressed easily at user’s level without calling any technician. However, you can also avail services from some tech support provider to repair your printer.
Printer Repair
Printer troubleshooting includes driver installtion, printer networking setup, test printer etc. For all these printer issues contact a tech support company.
Source : http://goo.gl/unsdK
1 comments:
If you haev an error code check the manufactures website for the the possible cause. When you call a repair company give them the error code and then see if they know what they are saying based on your internet search. run away from companies that will not give you an accurate phone estimate!
If you live in Southeast Florida Advanced business computers is a great source for help. Computer network repair, printer and copier maintenance repairs, leasing and supplies.
Post a Comment